PIPE & FITTING SYSTEMS
Butt Fusion IPS Tees
SDR 7 ( STANDARD DIMENSION RATIO ) 335 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FM Pressure Rating ( psi .)
FF-51.115.0002.07 2 ” IPS 9.69 4.88 2.87 0.339 2.375 335 FF-51.115.0003.07 3 ” IPS 11.61 5.79 3.54 0.500 3.500 335 FF-51.115.0004.07 4 ” IPS 13.78 6.89 3.94 0.643 4.500 335 FF-51.115.0006.07 6 ” IPS 17.68 8.82 4.72 0.946 6.625 335 FF-51.115.0008.07 8 ” IPS 23.03 11.46 5.67 1.232 8.625 335 FF-51.115.0010.07 10 ” IPS 27.17 13.54 6.22 1.536 10.750 335 FF-51.115.0012.07 12 ” IPS 29.72 14.84 6.77 1.821 12.750 335
• Molded from black PE 100 / 4710 resin & NSF-61 certified
• Complies with the following product standards : ASTM D2513 , D3261 , D3350 , and AWWA C906
• Made in the USA
SDR 9 ( STANDARD DIMENSION RATIO ) 250 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FM Pressure Rating ( psi .)
FF-51.115.0002.09 2 ” IPS 9.69 4.88 2.87 0.264 2.375 250 FF-51.115.0003.09 3 ” IPS 11.61 5.79 3.54 0.389 3.500 250 FF-51.115.0004.09 4 ” IPS 13.78 6.89 3.94 0.500 4.500 250 FF-51.115.0006.09 6 ” IPS 17.68 8.82 4.72 0.736 6.625 250 FF-51.115.0008.09 8 ” IPS 23.03 11.46 5.67 0.958 8.625 250 FF-51.115.0010.09 10 ” IPS 27.17 13.54 6.22 1.194 10.750 250 FF-51.115.0012.09 12 ” IPS 29.72 14.84 6.77 1.417 12.750 250
Notes : 1 . All dimensions shown are nominal and subject to manufacturing tolerance . OD and minimum wall are determined in accordance with ASTM standards . Drawing shown is an approximation only . 2 . The maximum pressure for gas applications should be calculated based on the applicable local and federal regulations . 3 . Fittings are marked to meet the applicable standards . 4 . Only fittings with a FM pressure rating are FM approved .
• FM Approval Class 1613
The Plastics Experts . 16 16